Battle Belt Bundle
The Battle Belt Bundle is our most advanced 1st-line system designed for long range days and working professionals. This bundle includes all the basics you need to support your handgun, rifle and personal health (if you select a medical option) built on our strongest and most capable belt options. The Battle Belt Bundle consists of a Velcro inner belt mated to a 1.75" or 2" Molle outer belt. The dual belt system requires a little extra time to "suit up" and is not considered a rapid response belt. The Battle Belt Bundle performs best during extended days "down range" and for patrol obligations.
Range Holster with your choice of mounting option
x2 Minimalist or Evolution Pistol Mag Carriers
x2 Minimalist or Evolution Rifle Mag Carriers
1.75" Kore Essentials Battle Belt or 2" Volund Gearworks Micro Battle Belt V2
Kore Essentials 1.5" Liner Belt (for Kore Battle Belt) or Volund Gearworks 1.5" Classic or G-Hook Liner Belt (for Volund Battle Belt)
TQ Pouch or IFAK Pouch (optional)
Kore Essentials Battle Belts are 1.75" wide & one-size to fit any waist from 24” up to 48"
Volund Belt Sizing:
Classic Liner Belt
These particular belts are cut to an overall length (OAL), which can fluctuate slightly during sewing and finishing. The belts are designed to overlap to fit properly, and the minimum overlap needed is around 3 inches.
Listed below is the OAL of the belts.
SM OAL: 38”
MD OAL: 42”
LG OAL: 46”
XL OAL 50”
Atlas G-Hook Liner Belt
1. Confirm you are wearing pants; in particular use the pants you most commonly wear.
2. Tuck in anything carried In Waist Band (IWB), undershirts, girdles, etc.
3. Measure around your waist, over you pants where your belt would ride. A tailor’s tape or even a string that you mark and measure after works fine.
3.5. You can also measure a belt you already use, from the buckle end to the most worn spot or hole. Just make sure this is a belt you’ve used that your new Atlas Belt will perform the same function. A casual or dress belt you wear with slacks is generally not sufficient.
4. This number is your actual waist measurement and you can use this number to choose your belt size.
Atlas Belts are cut to an overall length (OAL), which can fluctuate slightly during sewing and finishing. The belts are designed to overlap to fit properly and the minimum overlap needed is around two to three inches. Listed below is the OAL of the belts and the general fit range in inches.
SM 28”-34” OAL: 38”
MD 32”-38” OAL: 42”
LG 36”-42” OAL: 46”
XL 40”-46” OAL 50”
Micro Battle Belt V2:
Each size has a general min/max fit range. These are ACTUAL measurements so it’s up to you to measure around where the belt will ride most of the time to figure out the size needed. This measurement has nothing to do with what size pants you wear. Ideally, your best choice will be somewhere in the middle few inches of either size for the best fit.
SMALL: 30″ – 38″ [18 Molle slots]
MEDIUM: 36″ – 44″ [22 Molle slots]
LARGE: 42″ – 50″ [26 Molle slots]
X-LARGE: 48″ – 56″ [30 Molle slots]
** Firearm, Pistol and Rifle Magazines Not Included **